Technics SA-EX100 Operating Instructions

16
Preset tuning (continued)
To listen to preset broadcast stations
v preset”. Press V or / to select the -
(nee desired channel.
SLs
Presel channel
Holding the buttons down lets you scroll
through channels faster.
After the preset channel is displayed,
the frequency of the selected channel is
displayed.
You can select channels from the remote control with the
numeric buttons. See the instruction manual on “How to use the
remote control transmitter”.
To confirm the channel number of the broadcast
station being received
Press TUNER.
(The channel number will be displayed for approximately 1 second.)
The channel number is not displayed if you change the reception
frequency or FM mode setting.
For your reference
Even if the power is switched to standby or the power cord is dis-
connected from the household AC outlet, the memory will retain its
contents for approximately one month.
If frequency presettings are accidentally erased
Make the presettings once again.
The power cord should remain connected for one hour or more for
the memory back-up to be effective.
Direct access tuning
(Only available from the remote control.)
Specify the frequency using the numeric buttons on the remote con-
trol transmitter to directly tune to the desired broadcast station.
First select the band with the BAND button on the receiver.
SA-EX300 SA-EX100
Press TUNER.
This will set the remote contral to oper-
ate the tuner.
Press DIRECT TUNING.
fu q Nie
Z|N
Flashes
While cursor display is flashing
(approx. 10 seconds)
Press the appropriate numeric
buttons to enter the frequen-
zo. a 3 Cy.
if the desired FM frequency is 107.90 MHz
T+-)l-171-B- a)
Wana pio oe
mid TE he ae
If the frequency has been input correctly, the
displayed frequency will blink once.
1. If no button is pressed while the cursor display is flashing, the
display will return to the frequency which is currently being
received. To re-specify the frequency, repeat the procedure from
step 2.
2. {f the frequency has not been input correctly, “ERROR” indica-
tion will be displayed. In this case, re-enter the frequency.

Technics SA-EX100 Specifications

General

Brand	Technics
Model	SA-EX100
Category	Stereo Receiver
Language	English