Technics SA-EX100 Operating Instructions

Automatic memory presetting Manual memory presetting
FM AUTO/MONO
Set to the frequency from
which you want to start auto-
matic memory presetting.
(See page 14.)
MEMORY Press MEMORY until the fre-
quency begins to change.
(Automatic memory presetting will start.)
During automatic memory presetting,
the memory indicator will flash while the
frequency scrolls.
I
F vathes
To stop, press MEMORY once again.
When a broadcast station is preset
The memory indicator and the preset channel number will be dis-
played for approximately 1 second.
isi up
When presetting is completed
The last broadcast station to be preset will be displayed.
Frequencies may not be preset correctly in cases where the broad-
cast waves are too strong or too weak. in such cases, carry out
presetting manually.
1 Set to the desired broadcast.
(See page 14.)
If interference or static is keeping you from enjoying an
FM broadcast, press FM AUTO/MONO and change to
monaurual. You can preset the memory in monaurual
just as in stereo,
Press MEMORY. (Touch only.)
Lights up
To cancel the memory function, press
MEMORY again.
rea V or A to select the
[CT _Jeesirea channel,
a She
i m4 /
Flashes
Holding the buttons down lets you scroll
through channels faster.
7h i
erm i
The channel will blink on the display.
we
QUARTZLOCK "STEREO
me ere wy
tia Aa FLd wave
To continue presetting
Repeat steps 1 through 4,
15

Technics SA-EX100 Specifications

General

Brand	Technics
Model	SA-EX100
Category	Stereo Receiver
Language	English