Technics SA-EX100 Operating Instructions

22
The
sleep
timer
is
an
excellent
little
feature
that
lets
you
fall
asleep
with
the
radio.
You
can
set
the
timer
to
turn
off
after
30,
60
or
90
minutes.
The
sleep
timer
tums
off
the
receiver,
but
it
does
not
turn
off
any
externally
connected
components.
“ SA-EX300
SA-EX100;
Set to the desired broadcast.
(See pages 14-16.)
(While listening a source)
Press SLEEP and set how
long (minutes) you want the
source to continue playing.
SLEEP
SA-EX100 SLEEP SY
aI
SLEEP SY
% 30 -+ 60 + 90» OFF
The display returns to the way it was
before in about 5 seconds, and the
“SLEEP” indicator will appear on the dis-
|
played.
‘STEREO
SLEEP
ig o
Em 88 '0.,
To cancel the sleep timer
Press
SLEEP
until
“OFF”
is
displayed.
The
“SLEEP”
indicator
wil
go out.
To check how much time is left (while the timer is
running)
Press SLEEP once.
Do not press SLEEP again before the remaining time indication
goes out. if you do so, the timer will return to the setting mode.
To
change
the
setting
time
(while
the
timer
is
run-
ning)
1. Press SLEEP.
2.
Press
SLEEP
again
while
the
remaining
time
is
displayed
and
then
reset
the
timer
(30,
60
or
90
minutes).
if
you
make
a
mistake
in
operation
or
if
sound
output
stops
due
to
some
operation
which
was
performed,
the
HELP
function
displays
information
which
can
be
useful
for
indicating
the
method
by
which
this
condition
can
be
remedied.
If
ERROR’
or
scrolling
characters
(for
instance,
“TAPE
MONITOR
ON
NOW")
appears
on
the
display
during
operation,
carry
out
the
following
operation.
HELP
Press HELP on the remote
control transmitter,
The method for remedying this situation
will be displayed.

Technics SA-EX100 Specifications

General

Brand	Technics
Model	SA-EX100
Category	Stereo Receiver
Language	English