Technics SA-EX110 Operating Instructions

i
. Basic operations
e Less LEE — ARTT oM M— — — ——— TM ora i TT A
Before operation, set VOLUME to the “MIN” position.
1 Press POWER.
Press SPEAKERS to select the speaker system to
be used.
SPEAKERS -— SPEAKERS] — (OFF)
ie ia
Speakers A and B cannot be used at the same time.
Caution
Before selecting your speaker system, make sure impedance
is correct in the speakers you want to use. (See page 10.)
t
E
È
|
| Changes as follows each time the button is pressed.
|
|
|
Press to select the desired source, and start the
desired source.
(Refer to the appropriate operating instructions for details.)
c
2
1
O
VCR: To watch video tapes (VCR)
[ TAPE MONITOR |: To listen to cassette tapes (The tape
monitor indicator will appear.)
(See below.)
CD: To listen to compact discs
TUNER: To listen to radio broadcasts
PHONO: To listen to phono discs
Turn VOLUME to adjust the volume level.
After listening is finished
Be sure to reduce the volume level, and switch the power to the
standby condition by pressing POWER.
2 monitor indicator is lit or flashing
VOLUME
This indicates that the tape monitor function of this unit is ON.
To listen to sources other than a tape, be sure to press
TAPE MONITOR J and check the indicator goes out.
TAPE MONITOR ——..
—
TAPE MONITOR] >
kap ARR
| | |
| | |
|
|

Technics SA-EX110 Specifications

General

Brand	Technics
Model	SA-EX110
Category	Stereo Receiver
Language	English