Technics SB-M500 User Manual

SB-M500
Ref. No. 4 Removal of the Front Panel
Procededure 1 — 4
«Remove the 4
Catch Pin
¢ Remove the 4
Net Holder
Removal of the Catch Pin
Put the tape in Catch Pin
HB Removal of the Net Holder
To make space
Za $
Pincers
Absorver
1. To use a screwdriver ) and make space
between the front pane! and the Net Holder.
*
Remove
the
4
2.
Toinsert
the
pincers
type
point
and
take
the
Net
re th
screws
Holder
to
rotate.
o”
3X
Pay
attention
notto
break
the
Net
Holder.
Please,
x4
they
stock
the
Net
Holder.
(SHG8G9044).
°
@
Inserting
the
Net
Holder
and
Catch
Pin
ra)
1.
Insert
the
Net
Holder
using
the
5
mm
type
hexagonal wrench or similar tool like rod.
2. After inserting the Catch Pin, press the Catch
Pin covering with cloth using the hammer or
screwdriver grip.
* Remove the Front Panel in
the
direction
of
front.part
H
|
h
exagonal wrenc
(6mm) Hammer
“ an
ATTENTION
This
absorver
should
covere
the
cables
cee
Net
Hoider
Catch
Pin
of the conection wit the Speaker Midrange.
So that they don't touch the cavity.
emum> ©
Screw © 4,2 x 25 mm

Technics SB-M500 Specifications

General

Brand	Technics
Model	SB-M500
Category	Speakers
Language	English