Technics SC-CH700 User Manual

* Front Panel Controls and Functions
Compact disc player/tuner section
0 Band select button
(BAND, -BAND-ALLOCATION)
This button is used to seiect the desired radio band.
When press and hoid this button, the MW frequency step will
change.
(2) Preset tuning buttons (v PRESET a)
These buttons are used to select channel number for a broad¬
casting station which has been stored in the tuner's memory.
(3) Stop button ( □ )
This button is used to stop the disc play.
0 Pause button (OD)
This button is used to stop the disc play temporarily.
® Play button (l>)
This button is used to start playing the disc.
0 Normal/tape length edit button
(NORMAIJTAPE LENGTH)
This button is used to choose one of the edit modes or to
specify the tape length to be used.
0 Disc tray open/close button
OPEN/CLOSE)
These buttons are used to open/close the disc tray.
0 Al edit button (Q|)
This button is used to make an edit recording in one touch
action.
0 Tuning buttons (T TUNING A)
These buttons are used to tune a desired broadcast station.
0 Preset memory button
(MEMORY, -MANUAL -AUTO)
This button is used to put a broadcast station into the memory.
0 Search buttons (-4-4, P-^)
These buttons are used to move within the program of a
compact disc.
0 Skip buttons ( P-H)
These buttons are used to move (forward and backward) to
the beginning of the present or next track, respectively.
0 Fade-In edit button (FADE)
This button is used to make a fade-in edit recording.
0 Random button (RANDOM)
This button is used to play all the tracks in random order on the
disc.
0 Time mode select button (TIME MODE)
This button is used to change the time mode. The four patterns
of display information will be alternately displayed.
0 Tape-side select button (SIDE A/B)
This button is used to check the number of tracks and amount
of tape left over for side A or B.
14

Technics SC-CH700 Specifications

General

Brand	Technics
Model	SC-CH700
Category	Stereo System
Language	English