Technics SC-CH700 - Page 21

Display section
(@ Deck 1 remote indicator ([remote H
This indicator iiiuminates to show that deck 1 can be operated
with remote controi.
0 Dolby noise reduction indicators ( □ , Q)
This indicator illuminates to show the type of Dolby noise
reduction system.
@ Reverse mode indicators CO)
These indicators illuminate to show the reverse mode.
® Edit indicator ( I EDIT > )
This indicator illuminates when making an edit-recording from
a compact disc, or tape-to-tape recording.
(j^ CD edit indicator (CD)
^ This indicator illuminates to show edit-recording of a compact
disc is being made.
Edit speed indicators (X1, x2)
51 . These indicators illuminate to show the edit speed of tape-to-
taperecording.
f D eck 2 remote indicator (I remote H
This indicator illuminates to show that deck 2 can be operated
with remote control.
(!% Deck 1 tape travel direction indicators
These indicators illuminate to show the direction to tape
travel.
(m| Deck 1 playback indicator (PLAY)
This indicator illuminates to show that deck 1 is in the
playback mode.
@ Deck 1 tape indicator
This indicator illuminates to show that there is a tape in deck
@ Deck 1 tape counter
This indicator shows the amount of tape movement in deck 1.
@ CCRT indicator
This indicator illuminates when CCRT function is activated.
(lj|) Deck 2 tape counter
@) Deck 2 tape indicator
This indicator illuminates to show that there is a tape in deck
2 .
@ Deck 2 playback indicator (PLAY)
This indicator illuminates to show that deck 2 is in the
playback mode or recording mode.
@ Recording indicator (QS)
This indicator illuminates when in the recording (recording
standby) mode.
(0|) Deck 2 tape travel direction indicators
( ◄ . ► )
21