Technics SC-CH700 - CD Direct Access and Repeat Playback

To Start sequential play from a specific track to the last track and
then the disc automatically stops.
1 Press the input select button marked “CD”.
2 Press the numeric button corresponding to
the desired track number.
To select a specific track
Tracks 1-9:
Press the appropriate numeric button 1-9 directly.
Tracks 10 and up:
First press the 10" button and then one of the “1 ” to “9” buttons.
Track no. 13:
Track no. 20
Track no. 35
Play will start.
>
10
- T -
T
>
10
-
T
-
0
>
-
3
-
T
This function repeats the play of all tracks.
Press the repeat button before or during play.
REPEAT
a
T* T* 'T' •T’
Lij lij klj l£j
c
>
/
•/”/ /
/
U -U /
<1
p
Repeat play indicator will illuminate. -
•While program play is taking place, only the programmed tracks
will be played repeatedly.
•You can enjoy the same track repeatedly If only one track is
programmed.
Note:
ji, Oifect access play is not possible in the programmed play mode.
I (Tracks are added onto the programmed tracks.) Release the pro-
^ gram mode function first and then proceed to operate.
■ To cancel repeat play
Press the repeat button once again and the repeat
indicator will go out.
29