Technics SC-CH700 User Manual

Making a Recording
■ To erase a recorded tape (Deck 2 )
When new recordings are made on a pre-recorded tape, all sounds
recorded on that portion of the tape are automatically erased. To
erase a tape without making a new recording, follow the steps
below.
Steps 5 and 6 can be operated using the remote control with the
procedure below.
(continued)
■ To record with desired tone and effect
You can make a recording with the graphic equalizer and/or sur¬
round sound effect. (See page 58-66.)
When playing back such recordings, press the equalizer ON/FLAT
button to set "FLAT" and press the SFP OFF/ON button to go off
the SFP indicator.
1) Press the Dolby noise reduction button to turn off the Dolby
noise reduction indicator.
2) Insert the recorded tape into the cassette holder of deck 2.
3) Press the input select button marked "TAPE" on the amplifier.
4) Select the desired reverse mode.
5) Press the record/record standby button.
6) Press the playback button corresponding to the side to be
erased.
44

Technics SC-CH700 Specifications

General

Brand	Technics
Model	SC-CH700
Category	Stereo System
Language	English