Technics SC-CH700 - Storing and Retrieving Custom Sound Modes (USER Mode)

Creating Your Own Sound
4 3-5
up to 5 types of sound quality can be memorized.
1 Select the desired equalization curve or sur>
round sound mode.
(See page 58 and 62.)
2 Adjust the selected equalization curve and/or
surround sound mode.
(See page 61 and 64-65.)
3 Press the memory button.
The "MEMO” will appear on the display.
A/? c n
I f L > I u
■ To retrieve the USER mode from the memory
Press the user mode select button to select the
desired memory number.
Notes:
•The previous setting memorized in a number will be cancelled if a
new setting has been memorized in that number.
•The memory will be maintained for as long as approximately
2 weeks even if the unit is in the standby mode.
4 P ress the user mode select button to select
the desired memory number.
Each time this button is pressed, the display will change as
follows.
MEM01—MEM02—MEMOS
t I
MEM05 - MEM04
5 P ress the memory button.
The memory number you select will be displayed as a “USER"
number.
56