Technics SC-EH600 User Manual

Recording from compact discs
For SC-EH600
Recording onto left over space on tapes
{LINK)
You can link up another CD when "LINK" flashes after editing a CD.
I! Press A OPEN/CLOSE to replace the CD with
another one.
The tray of the last disc (disc 5) will open. Load the new CD in
there,
■ flrarl
If you were recording programmed tracks, the tray with the disc
you were recording from will open.
Q Press >.
Linking will start.
To continue linking tracks:
Repeat steps Q and Q.
As long as there is space on the tape to record, when the recording
finishes, the cassette deck will put linking on standby.
To cancel the LINK function:
Press ■ on the CD changer.
Linking programmed tracks E
© Perform step Q above, and then press PROGRAM on the remote
control.
( 2 ) Select the track number from the remote control with the numeric
button(s).
(D Repeat step © until all desired tracks are programmed (max.
24 tracks).
® Press ► . Linking will begin.
Notes
• When recording from a programmed CD other than disc 5, if you
press the A OPEN/CLOSE button, the tray with the programmed
CD will open /close.
•When the display shows "0:00", you cannot record from another
CD. Press ■ on the CD changer.
•If the time remaining on the tape is shorter than the length of a track
to be recorded, you cannot record a track. Replace with a track
shorter than the time remaining on the tape or press ■ on the CD
changer.
I
ording
operations

Technics SC-EH600 Specifications

General

Brand	Technics
Model	SC-EH600
Category	Stereo System
Language	English