Technics SC-EH600 User Manual

SET
MANUAL
HE-CH-
Hiirol
IV&LOme!
MANUAL
RUT8 MEtlOR
fiiairal
WflLUMei
◄ -
PRESET
TUNEDI
_ _STEREO
FU 98 iumzl
Memory presetting
•Once stations have been preset, you can easily select them from the
tuner/amplifier or the remote control.
•You can preset a total of 39 stations between the FM and AM bands.
•Stations can be set automatically or manually.
The frequencies are automatically preset (in sequence from lower to
higher frequencies) into the memory: "channels" 1 to 39 are available
for the presetting of FM stations and "channels" 21 to 39 are available
for AM stations.
This example in the figure shows how to preset FM stations.
f| Switch on the power.
H Press TUNER/BAND to select the desired band.
Each time you press this button, "FM" and "AM" will appear
alternately.
Q Press TUNING MODE to select “MANUAL”.
Each time you press this button, "MANUAL" and "PRESET"
will appear alternately.
FI Press and hold TUNING (v or a) until the dis¬
play shows the frequency from which you want
to begin automatic memory presetting.
Press TUNING (v or a ) momentarily to stop scrolling when the
displayed frequency approaches the desired frequency. Tap
TUNING (v or a ) a few times until the desired frequency is
reached.
H Hold down SET.
Release your finger when the words "AUTO MEMORY" scroll
across the display.
The "ME" in the display will then flash while the tuner/amplifier is
storing the received frequency in memory. When storing is complete,
"SET OK" will be displayed.
To confirm the preset stations: E
1. Press TUNING MODE to select "PRESET".
2. Press TUNING (v or a).
"STEREO" lights when an FM stereo broadcast is being received.
"TUNED" lights when you precisely tune in a broadcast station.
When “ERROR” appears:
Automatic memory presetting does not work when radio waves from
the broadcasting station are too strong or too weak.
In such case, carry out presetting manually. (See page 14.)
Note 1
When you preset a broadcast station to a channel that has already
been preset, the previous presetting will be erased. So if, for example,
FM frequencies are preset from channel 1 to 39 and then AM frequen¬
cies are preset, the first AM frequency will be preset to channel 21
(thus erasing the FM presetting to channel 21), the second AM fre¬
quency will be preset to 22 (erasing FM 22), and so on.

Technics SC-EH600 Specifications

General

Brand	Technics
Model	SC-EH600
Category	Stereo System
Language	English