Technics SC-EH750

g
3
2
&
%
a
Memory presetting
@Once stations have been preset, you can easily select them from
the tuner amplifier or the remote control.
®The frequencies are automatically preset (in sequence from lower
to higher trequencies) into the memory: “channels” 1 to 39 are avail-
able for the presetting of FM stations and “channels” 21 to 39 are
available for AM stations.
This exampie shows how to preset FM stations.
Preparation:
Press [(/}} to turn the unit on.
Press [TUNER/BAND] to select the desired
band.
Each time you press this button; FM<—>AM
Press [TUNING MODE] to select “MANUAL”.
Each time you press this button; MANUAL<~—> PRESET
Press and hold [TUNING (v or ~)] until the dis-
play shows the frequency from which you want
to begin automatic memory presetting.
Press [TUNING (v or ~)] momentarily to stop scrolling when
the displayed frequency approaches the desired frequency. Tap
[TUNING (v or a)] @ few times until the desired frequency is
reached.
Hold down [SET].
Release your finger when the words “AUTO MEMORY” scroll
across the display.
If the above is not possible because radio signals are weak or
for some other reason (“ERROR” appears), do the following.
Presetting only your favorite stations
Preset the stations one at a time.
@ Press [TUNER/BAND] to select the desired band,
® Press [TUNING MODE} to select “MANUAL”.
@® Press [TUNING (v or «)] to tune in the desired broadcast.
@ Press [SET].
© Press [TUNING (v or «)] to select the desired preset channel.
Press [SET].
When you preset a broadcast station to a channel that has already
been preset, the previous presetting will be erased. So if, for exam-
ple, FM frequencies are preset from channe} 1 to 39 and then AM
frequencies are preset, the first AM frequency will be preset to chan-
nel 21 (thus erasing the FM presetting to channel 21), the seconds
AM frequency will be preset to 22 (erasing FM 22), and so on.