Technics SC-EH750

Using the timer
This timer starts play of the selected source at the selected time. The
example shows settings for a CD to play between 6:00 and 7:30 at
—40 dB.
Preparation:
Turn on the power, set the time (= page 13), preset radio stations if
you want the timer to start playing the radio (= page 14).
il @Press [CLOCK/TIMER, -DEMO] to select
“© PLAY”.
@ Press [SET] within 3 seconds.
(“ON” time setting)
:
i
@
Press
[TUNING
(v
or
)]
to
show
the
time
to
@PLAYIOREC start playing.
©
@Press
[SET].
to. (“OFF” time setting)
|
ay
STUN!
i
@
Press
[TUNING
(v
or
)]
to
show
the
time
to
;
@
~=pevo
:
<3
7
:
finish
playing.
i
Gy
:
:
@
Press
[SET].
:
-
24
OPress
[TUNING
(v
or
4)]
to
select
the
de-
sired source.
The display will change as follows.
CD<—>+TAPE«—>+TUNER
ee
Insert a CD or tape if you select these sources.
@ Press [SET].
When you select “TUNER’, select a desired preset channel us-
ing [TUNING (v or )}, and then press [SET].
Al
©Press
[TUNING
(v
or
,)]
to
adjust
the
vol-
ume
level
for
the
timer
play.
@
Press
[SET].
The
display
will
show
ON
time,
OFF
time,
the
source
you
select,
and
the
volume
level
alternately,
and
then
resumes
the
previous
display.
Please
confirm
“©
PLAY".
6]
Press
[/l]
to
switch
the
power
to
standby
mode,
The
timer
play
will
start
at
the
preset
time
with
volume
increas-
ing
gradually
up
to the
volume
level
you
preset.
c i To cancel the timer:
ISC-EH750/am SC-EH550 ‘ Turn the unit on and press [© PLAY/® REC} to put out “© PLAY”.
‘ 4 Each time you press the button,
© PLAY © REC-»© PLAY © REC- Light off (OFF)
— |
The play timer function will be canceled, but the settings stay in the
memory.
For your reference:
When you insert cassettes in decks 1 and 2, deck 1 has priority for
timer play on tape.
Thner’