Need help?Do you have a question about the Technics SE-A7 and is the answer not in the manual?
General| Type | Stereo Power Amplifier |
|---|---|
| Output Power | 100 W (8 Ohms) |
| Frequency Response | 5 Hz - 100 kHz |
| Total Harmonic Distortion (THD) | 0.003% |
| Input Sensitivity | 1.0 V |
| Input Impedance | 47 kOhms |
| Dimensions | 420 x 140 x 350 mm |
| Weight | 12 kg |
| Damping factor | greater than 1000 |
| Speaker load impedance | 4 to 16 ohms |
Details power output, distortion, and frequency response for amplifier section.
Circuit to detect speaker impedance for optimal operation and voltage matching.
Diagram illustrating mono BTL operation mode and its circuitry.
Adjustments for load impedance detection and transistor idling current.
Calibration and adjustment of the FL peak power meter display.
Key checkpoints for verification after adjustments or repairs.
To Next Page
