❍ VR311:
Output voltage adjustment VR (L ch)
❍ VR312:
Output voltage adjustment VR (R ch)
❍ VR401:
Balance control VR (BALANCE)
❍ VR402:
Tone control VR (BASS)
❍ VR403:
Tone control VR (TREBLE)
● Indicated voltage values are the standard values for the unit measured by the DC electronic
circuit tester (high-impedance) with the chassis taken as standard. Therefore, there may exist
some errors in the voltage values, depending on theinternal impedance of the DC circuit tester.
No mark : Power ON
● Important safety notice:
Components identified by
mark have special characteristics important for safety.
Furthermore, special parts which have purposes of fire-retardant (resistors), high-quality
sound (capacitors), low-noise (resistors), etc. are used.
When replacing any of components, be sure to use only manufacturers specified parts shown
in the parts list.
● Caution!
IC and LSI are sensitive to static electricity.
Secondary trouble can be prevented by taking care during repair.
Cover the parts boxes made of plastics with aluminum foil.
To Next Page
Loading...
