Input sensitivity/input impedance
PHONO 1.5 to 15mV/47k
LINE 100 to 1000mV/more than 10k
AUX/EFFECTOR 150mV/47k
MIC 0.7mV/1k
Rated output voltage
LINE 1V/600
MONITOR 2V/2.2k
PHONES 1.5V/100 (100 load)
REC 1V2.2k
Maximum output voltage (10k load excluding headphones)
LINE 8V
MONITOR 8V (headphones open)
PHONES 1.5V (100 load)
REC 8V
Applicable load impedance
LINE More than 600
MONITOR More than 10k
PHONES More than 47
REC More than 10k
Residual hum and noise
Less than 0.2mV
Frequency response
PHONO 30Hz to 15kHz (RIAA±1dB)
LINE 10Hz to 70kHz (-3dB)
AUX/EFFECTOR 10Hz to 100kHz (-3dB)
MIC 100Hz to 15kHz (-3dB)
Tone control characteristics
12dB/oct
LOW +12dB, -24dB (63Hz)
HIGH +12dB, -24dB (10kHz)
General
Power supply AC 230-240V, 50/60Hz
Power consumption 16W
Dimensions (W×H×D) 260×102×305mm
Mass 3.5kg
Note: / Specifications are subject to change without notice. /
Mass and dimensions are approximate.
2000 Matsushita Electric Industrial Co., Ltd. All rights reserved.
Unauthorized copying and distribution is a violation of law.
1. Note
2
To Next Page
Loading...
