Technics SJ-HDA710 - Moving tracks - MOVE; Changing track order

TRACK 1
TRACK
1 1<4<4 SKIP >I
5 @ Selected track number
Rocce neem eaareeree nce reeerereeserensesessee ees esesseeesean
2 EDIT
PPPTeTOVITETITITIPT eT Terrie rer)
3 ENTER
© New track number
PTYTETTTET ITEP
5 ENTER
ae
MOVE, COMBINE, and ERASE can also be done on the main
unit with the same buttons. ({¢<] and [»p1] are labeled [<
| <<] and [>> /pp] on the main unit.)
Moving tracks - MOVE
This function allows you to permanently change the order tracks are
played in.
Make sure the disc is record enabled.
While stopped
1 Press [<<] or [ pp] to select the track
to be moved.
2 Press [EDIT] to select “MOVE?”.
Each time the button is pressed: TRACK TITLE? > DISC
TITLE? - MOVE? -— COMBINE? — TRACK ERASE? —>
ALL ERASE? — current display
io)
Press [ENTER].
>
Press [<<] or [pp] to select the
position (track number) the track is to
be moved to.
To move the track to position 5, track number “5S” should be
on the display.
5 Press [ENTER].
A message confirming your selection appears on the display.
tf you wish to cancel press [ll] now.
6 Press [ENTER].
The move is confirmed after “UTOC Writing” disappears from
the display.
To move a track while it is being played al
This is useful when you want to make sure of the track you are
moving.
While playing the track to be moved
@ Press [EDIT] to select “MOVE?”
Each time the button is pressed: TRACK TITLE? -+ DIVIDE? >
MOVE? — COMBINE? — TRACK ERASE? — current display
@ Press [ENTER].
@ Press [44] or [>i] select the position (track number) the
track is to be moved to.
@ Press [ENTER] twice.
The move is confirmed after “UTOC Writing” disappears from
the display and play stops.
To cancel part way through
Press [Ml].
To return the track to its original position
Repeat the above steps, selecting the track’s original position in
step 4.
19
RQTS454