Need help?Do you have a question about the Technics SL-DD33 and is the answer not in the manual?
General| Drive System | Direct Drive |
|---|---|
| Turntable Speeds | 33 1/3, 45 rpm |
| Wow and Flutter | 0.025% WRMS |
| Signal to Noise Ratio | 78 dB |
| Dimensions | 430 x 100 x 375 mm |
| Weight | 5.5 kg |
| Effective Arm Length | 230 mm |
| Overhang | 15 mm |
| Frequency Response | 20 Hz - 20 kHz |
| Power Consumption | 4 W |
| Platter | Aluminum die-cast |
| Type | Semi-automatic |
| Motor | DC Motor |
| Rumble | -78 dB |
| Cartridge Type | Moving Magnet (MM) |
| Output Voltage | 2.5 mV |
| Tracking Force | 1.25 g |
| Cartridge | P-Mount Cartridge |
Detailed specifications for the turntable mechanism and performance.
Technical specifications for the tonearm assembly and its capabilities.
Procedure and criteria for testing insulation resistance to prevent electric shock.
Steps to safely detach the cartridge from the tonearm.
Procedure for carefully removing the stylus from the cartridge.
Detailed instructions for removing the tonearm assembly.
Adjustment procedure for the tonearm lift height.
Adjustment for the tonearm's automatic start position.
Adjustment for the tonearm's automatic return function.
To Next Page
