Technics SL-HD560E - Operation Checks and Component Replacement; Main P.C.B. Checking Procedure; CD Servo P.C.B. Checking Procedure

- This section describes procedures for checking the operation of
the major printed circuit boards and replacing the main
components.
- For reassembly after operation checks or replacement, reverse the
respective procedures. Special reassembly procedures are
described only when required.
6.1. Checking for the main P.C.B.
- Check the main P.C.B. as shown below.
6.2. Checking for the CD servo P.C.B.
- Follow the (Step 1) - (Step 3) of item 6.1.
5