Technics SL-MC6

Operations
PROGRAM
a
DISC ENTER 7
PROGRAM © ""}
seed 080
malar wot
Program play
Program play fets you playback your favorite tracks in the sequence
you want to hear them. The program can hold up to 32 item,
[In the stop mode]
Press PROGRAM.
Press DISC/CAPS.
Press the numeric button(s) to select the
disc(s).
Press DISC ENTER.
The “AL” indication shows that all the tracks on the disc are
selected.
To program disc numbers only, repeat step 2-4.
Slot No. 0 can also be programmed.
Press the numeric button(s) to select the
track.
Repeat this step if you want to enter tracks from the same
disc.
Repeat steps 2-5 unti! you have completed all
entries.
¢ PGM FULL is displayed if you try to enter a 33rd item.
* Empty slots and track numbers that don’t exist on the discs can be
programmed but clear when play starts.
6 | Press DP.
The changer plays the tracks in the programmed order and
then stops automatically.
To enter additional selections during play, repeat steps 2-5.
(Only available from the remote control.)
If, while listening to a certain track, you decide that you want to pro-
gram that track to your program, you can with direct programming.
[While the track you want to program is playing]
Press DIRECT PROGRAM.
When you make a program as explained under “Program play”
above, and then perform this procedure without clearing the pro-
gram first, the selected track is added to the end of the program.
To listen to programmed tracks, press PROGRAM and check
“PROGRAM” appears on the display, then press >.
elf you press DIRECT PROGRAM and there are already 32 items
in the program, “PGM FULL" is displayed and the track cannot be
added.
¢ During program piay, DIRECT PROGRAM does not respond to
touch.