Technics SL-MC6

RECALL
Program play
To check programmed contents Zi
(Only available from the remote control.)
Press RECALL.
The programmed tracks are displayed in order each time it is
pressed.
To clear programmed contents
(Only available from the remote control.)
In the stop mode]
To clear a specific item from the program
Press RECALL until the item is displayed, then press CLEAR.
To clear the last item on the program
Press CLEAR.
Operations ea
To clear the entire contents of the program
Press Ml.
[ To cancel the program mode
{In the stop mode]
Press PROGRAM.
The PROGRAM indicator goes out.
The contents of the program are stored in the memory.
To replay your program
1. Press PROGRAM.
2. Press >.
Special note on recording programs
The changer needs time to change the discs and find the tracks.
Consequently, it will take the changer slightly longer than the total
track time to record everything. Exactly how much longer depends
on the contents of the program,