Technics SL-MC6

Operations iil
Disc grouping play
“(Only available from the remote control.)
(aa You can put discs into 5 groups (A~E). You can then play the dises
| va in those groups.
@ Each disc can belong to more than one group.
@ Each group can include up to 110 dises.
@ Each group can be named.
[During sequential play or while it is on stop]
Press DISC.
Press the numeric button(s) to select the
~ disc.
To select a disc numbered over 10
For example: “19”
tI- Lg
You cannot select slot No, 0.
Press GROUP ENTER.
If the disc is already registered in a group, the group's letter
lights up.
GROUP @
Press GROUP.
C
Press the numeric button corresponding to
the group (A, B, C, D or E).
The disc chosen in step 2 is registered into the selected
group.
Repeat steps 1-5 to register other groups.
To check what discs are in what groups
[While it is on stop]
1. Press GROUP.
2. Press the numeric button corresponding to the group.
3. Press il.
4, Press DISC SKIP (- or +).
The numbers of the discs in the group will be displayed each
time the buttons are pressed.
After checking, if you press the button of a group that is lit on the
display, the disc grouping mode disengages.