Technics SL-MC6

Disc grouping play
| To cancel dises from groups
Press DISC.
Select the disc you want to clear with the numeric buttons.
Press GROUP ENTER.
Press GROUP.
Press the numeric button corresponding to the group.
The selected group indication on the display will go out.
Sr ON
For your reference
If the disc is registered in more than one group, you can cancel it
from ait groups in a single operation by pressing MM in step 4 (in the
stop mode}.
{While stopped or during sequential play]
First, follow the steps on the previous page to register the groups.
Press GROUP.
Press the numeric button corresponding to
the group.
To cancel disc grouping play mode
(While the changer is stopped.)
Press GROUP and then the numeric button corresponding to the
group shown on the display.
© The name of the group is shown if it has been named (mpage 16).
® If you press the group button of a group which has no discs regis-
tered in it, the message “NO INPUT” will appear on the display.
g
§
Ps
g
ie)