Technics SL-MC60

Operation
Program play
Program play lets you playback your favorite tracks in the sequence
you want to hear them. The program can hold up to 32 steps.
D [In the stop mode]
Press PROGRAM.
Select the disc{s) you want with the numeric but¬
tons.
For example:To select disc 3.
I DISC I -» | 3 | - > 1 DISC ENTERl
The "ALL" indication shows that all the.tracks on the disc are
selected.
To program by means of disc numbers only, repeat the above
operation. (The count will increase by one for each opera¬
tion.)
You can select slot No. 0.
Press the numeric button(s) to specify the track.
For example:To select track No. 20
[Ho] to
To program another track from the same disc, simply specify
the track No.
Repeat steps 2 and 3 until you have completed all
entries.
If you attempt a 33rd selection, the "PGM FULL" indication will
be displayed.
If you enter non-existing disc(s) or track(s), the corresponding
indicator illuminates and the entry is included in the count. In
the play mode, the changer will cancel the non-existing entry.
Press ► to start play.
To enter additional selections during play, repeat steps 2 and
3.
To clear all programmed contents Q
[In the stop mode]
Press ■ .