Technics SL-PG440 User Manual

■ Example:
Recording the desired tracks from 3 discs on
60 minute tape
Side A (30 minutes) Side B (30 minutes)
C-60
r- : -H b- : -H
o □ o
3 1 10 7 5 2 | 9 6 4 5 1
Disc 1
-——-
Disc 2
- — '
Disc 3
| Recording for disc 1
1 Prepare the cassette deck for recording.
2 Press PROGRAM and then enter the desired track number
in desired sequence.
3 Press TAPE LENGTH twice to select “C-60 ”.
4 Press DISC LINK.
5 Adjust the recording level on the cassette deck.
6 Press ► PLAY to start recording.
Recording for disc 2
1 After recording is completed, press ± OPEN/CLOSE.
2 Replace disc 1 with disc 2.
3 Press * OPEN/CLOSE again.
The unit automatically programs tracks on the remaining
space and the display shows the number of tracks to be
recorded, in normal sequence.
4 Press CLEAR to cancel the tracks automatically pro¬
grammed.
Press the button repeatedly until the display shows “0".
5 Enter the track number for side A.
2
□
6 Press SIDE A/B to switch the display.
7 Press CLEAR to cancel the tracks automatically pro¬
grammed.
8 Enter the track number for side B.
1 Recording for disc 3
1 After recording is completed, press ± OPEN/CLOSE.
2 Replace disc 2 with disc 3.
3 Press A OPEN/CLOSE again.
4 Press CLEAR until the display shows “0”.
5 Enter the track number.
6 Adjust the recording level on the cassette deck.
7 Press ► PLAY to start recording.
Notes:
•The “0” may appear on the track display after you replace the
disc. This means that that the first track on that disc is longer than
the remaining space of the tape. In this case, press ■ STOP to
cancel the edit mode.
•If the cassette deck has no synchro edit terminal, the tape will
keep running even after disc play has been completed. Press the
stop button on the cassette deck.
•Do not forget to stop the tape and rewind it to the position where
te recording was completed. If the deck is not equipped with an
auto reverse mode, change the tape over to side B when the
recording on side A is finished.
■ To cancel the link function
Press ■ STOP after recording has finished.
stop I
The edit mode will be also cancelled.
9 A djust the recording level on the cassette deck.
10 Press ► PLAY to start recording.

Technics SL-PG440 Specifications

General

Brand	Technics
Model	SL-PG440
Category	CD Player
Language	English