Technics SL-PG440

Recording from Compact Discs
Fade out editing
You can enter an additional track and record them with the fade-out
at the end of each side of the tape.
For example, to add track 3 on the remaining time and to set the
fade-out on each tape side.
C-60
|q g o|
| Side A (30 minutes) | | Side 8 (30 minutes) |
I 1 |2|3|4|5|6T7Te\ 18 19 1 kTHFi
t t
Fade-out Fade-out
1 Prepare the cassette deck for recording.
(See page 21.)
2 Press TAPE LENGTH to select the tape length.
(See step 2 on page 20.)
Remaining time on side A
(Time for recording an additional track)
PGM ~l 1 c
1 No. •
EDTr - **! 23456789
3S
10 11 12
3 E nter the additional track to be recorded on
the remaining time on side A.
(See page 23.)
For example, if you enter track 3:
Minus indication
4 P ress TIME FADE.
Time fade indicator
~ 8
8
- 2 -05
No. ItFADTI
Eon"* A T 2 1
7 ? 6 7 8 9 « H 12
If you want to add a track on the remaining time on side B,
press SIDE A/B then repeat steps 3 and 4.
5 Adjust the recording level on the cassette
deck.
(Follow steps 3 and 4 on page 20.)
6 Press ► PLAY to start recording.
• Recording on the cassette deck will start at the same time.
•The fade-out begins 5 seconds before the end of the tape.
Flashes on and off
O / COT
o 3 ■ C < |Tw
EDfT**1 2 3 4 5 6 « 11 12
--- --
►
m
■ To cancel the fade out editing
Press ■ STOP after recording has finished.
STOP
■
The edit mode will also be cancelled.
26