Technics SL-PS670A

E> To select an arbitrary recording
length
Press TAPE LENGTH, select
TAPE
LENGTH Ce ma #3 ee ol meebo = 2 ie L—2—1
L--—" ana enter iné totai
time for both sides of the tape
(1 to 99 minutes) as a two-digit
value.
aaa |
+
b.4 6
S
For example: = 2S
To select 30 minutes: OO
oO 5
OO
lf you make a mistake when entering this value, select “C-——'
again.
To select 5 minutes:
E> To add tracks in the extra space on
the tape
After step 2, press the numeric
: Q =1° buttons to specify the desired
OW
O
re)
track
number.
fRaa nanan 1)
yeee page iv.)
When minus sign appears on the display, it indicates that the time
remaining on the tape is insufficient. Minus sign display
(Insufficient time an tape)
= ca a
| is
eorAT TIT Ts 7
Ln
ani
51
To fade out at the end of the tape during minus
sign display:
pone Press TIME FADE.
J
At the end of the tape the sound will gradually decrease anc record-
ing will end.
If you want to fade out at the end of side B, press SIDE A/B, then
repeat the same procedure described as above.
Track numbers and numbers of tracks which cannct be edited:
Editing cannot be performed on more than 20 tracks or on ack
~" mumbers above 20.
In such instances, forgo use of the edit recording function, and
simply perform recording in norma! playback mode.
For your reference:
Displayed time remaining on the tape:
The remaining tape time represents the length of time minus the
unrecorded blanks lasting about 4 seconds provided at the start of
each track for automatic searching.
*Peak level:
Since multiple peaks exist on compact dises, even for the same disc
a different peak level may be found each time a peak search is
performed.
17