Technics SL-PS670A

18
This function allows you to program the desired tracks in the desired
order and then divide and record tham on sides A and B of a tape.
7 Prepare the cassette deck.
= Perform step 1 on page 16.
2 Specify the deslred tracks in
order.
Perform steps 1 and 2 on page 10.
Total playing time of programmed tracks
Number of tracks programmed
sOOGtAM
—
t=
GS
8
ice
TRACK
Mo.
wr
mec
Program tracks such that the total playing time ts jess than the length
of the tape. When CD edit made is entered, about four seconds will
be added at the beginning of each track (auto-space function).
ee
Press TAPE LENGTH and
specify the length of the tape.
Perform step 2 on page 16.
Divide the tracks between sides A and B
in accordance with the specified time.
Number of tracks on side A
: Time remaining
Last track on side A on side, A
PROGRAM 17 y Se
Press SIDE A/B to check the
time remaining on side 8.
The time remaining on side B is dis-
played.
ee
5 Adjust the recording level.
Perform steps 3 and 4 on page 16.
ee ee eS
Press > at the same time you
begin recording on the cas-
setie deck.
®When the tracks allotted to side A have been recorded:
The CD player pauses at the beginning of the first track on side B.
The cassette deck continues recording and then stops at the end of
side A.
®To record side B:
1. Remove the tape to wind the leader.
2. (For double-side playback dack)
Insert the tape and set the running direction to <.
(For single-side playback deck)
Tum the tape around and re-insert it.
3. Bagin recording on the cassette deck while simultaneously begin-
ning playback on the CD player.
To cancei CD edit mode:
Press @.
t wWY
To change the program contents
To change the side A contents in steps 3 ard 4, first press SIDE AB
to switch to the dispiay for side A.
To add tracks at the end of sides A and B of the
tape:
t 3 e
ae ‘e)
To erase the last track at the end of sides A and 8
of the tape:
=10 Press the numeric buttons.
(See page 10.)
~~ - Press CLEAR. ae
A
To change the last track at the end of sides A and B
of the tape:
co Press CLEAR and
press the numeric buttons fo re-snacify
b:5 O68
S
To erase a track within the program:
Press RECALL to disptay the track tc be
erased and then
s press CLEAR.
if the following display appears:
Minus sign display
‘
Cu aa
;
|
a= +
eri pF 4g Tr Fe 3-5
The total playing time of the programmed tracks exceeds the length
of the tape.
Erase or change tracks such that the minus sign display disappears.
or specify fade out. (See page 17.)
Track numbers and numbers of tracks which can-
not be edited:
Editing cannot be performed on more than 20 tracks or on track
numbers above 20. °° 7 oo
in such instances, forgo use of the edit recording function, and
simply perform recording in normal playback mode.