Technics SL-XP140 - Page 5

Skip play _
Preparation:
Set the unit to the stop mode. (See page 3.)
1 Set MODE to NORMAL
2 Press •SKIP/* SEARCH to se¬
lect the desired track number.
3 Press >11.
The tracks are played in sequence starting
with the selected track until the last track,
after which play is automatically stopped.
Resume play __
Set MODE to RESUME.
SSb 5 O S I
Play can be resumed from the start of the
track which was playing when the stop mode
was last selected or when the power was last
turned off.
This is useful when playing discs inside a
car.
To cancel the resume mode
Set MODE to NORMAL.
For your reference:
If MODE is set to RESUME while the unit is
turned off, the all repeat function is automat¬
ically activated when play is started.
•If play is stopped near the end of a track, it
may be resumed from the next track.
•When a track is being played, if the power
is turned off and another disc is inserted,
the position of the track last played is still in
die memory, and play will start at the same
position among the tracks on the newly
inserted disc.
To change the tone quality _
(Available except when using the OUT
lack.)
XBS
ON: For extra bass sound
OFF: To cancel the XBS mode
Up to 24 tracks can be programmed.
Preparation:
Set the unit to the stop mode. (See page 3.)
1 Set MODE to NORMAL
2 Press e SKIP/•• SEARCH to se¬
lect the desired track number.
For example:
To select track 3, press »| 3 times.
Track number
3 P ress MEMORY/RECALL to
store the number in the memory.
Track number j
Program order
4 Repeat steps 2 and 3 to program
all the desired tracks.
5 Press > 9 B.
To program the same track re¬
peatedly
Press MEMORY/RECALL repeatedly after
step 3.
When *' f ” appears
No more tracks can be programmed.
To check what has been pro¬
grammed
Press MEMORY/RECALL during play.
(The display shows the programmed track
numbers In the sequence you have entered.)
To cancel all the programming
Press B/POWER OFF.
Random play _
1 Set MODE to RANDOM.
2 Press > IB.
To cancel the random mode
Set MODE to NORMAL.
To repeat one track
Press REPEAT once in the stop mode or
during play.
To repeat ail the tracks
Press REPEAT twice in the stop mode or
during play.(ln the program play mode, only
ail the programmed tracks will be repeated.
“ALL” will not be appeared.)
I I
To cancel the repeat function
Press REPEAT once in the all repeat mode.
Using the unit with an audio
system_
Using the stereo connection cable (not in¬
cluded), you can hear CDs on your audio
system.
•Connect the ciAle to the amplifier after turning off
its power.
e Do not connect the cable to the PHONO jacks on
the amplifier.
e Obtain the optional oonneotlng cable if the ampli¬
fier comes with mini-phone jacks.
eAdjustths volume level on the amplifier.
Using the unit with a car audio
system__
For your reference:
The first track to be played can be changed
by pressing » in the stop mode. (All the
tracks are played regardless of the track first
played.)
[iNoteT]
Program play is. not possible in the
RANDOM mode.
The SL-XP141C comes with the car adaptor
and car stereo cassette adaptor.
Items to be purchased
For connection to the car audio aystem:
Car stereo cassette adaptor (SH-CDM9D)
For securing the unit and connecting the
power supply:
•Car adaptor (SH-CDC9)
•Car Mount Kit (SH-CDF7)
Car mounting arm, Car insulator
BgfHBa
It may not be possible to use the unit with
some types of car audio systems owing to
restrictions imposed by the construction of
the car stereo cassette adaptor or car Mount
kit.