Technics SL-XP505 User Manual

Connections
■ Listening through an audio
system
Use the Stereo Connection Cable (in¬
cluded) to connect this unit to a receiver or
a stereo cassette recorder.
•Switch OFF the power to the receiver or
stereo radio cassette recorder before con¬
necting this unit.
•Do not connect this unit to the PHONO
terminals of the receiver or stereo radio
cassette recorder.
(included) ®“clio
system
■ Listening through the stereo
earphones or headphones
Connect the plug of the Stereo Earphones
(included) or headphones (option) to the
Headphones Jack.
Note for stereo earphones:
The right earphone cord is longer than
the left and is adjustable for your conve¬
nience.
Precautions for Listening with the Headphones
► D o not play your headset at a high volume. Hearing experts advise against continu¬
ous extended play.
► I f you experience a ringing in your ears, reduce volume or discontinue use.
► D o not use while operating a motorized vehicle. It may create a traffic hazard and is
illegal in many areas.
► Y ou should use extreme caution or temporarily discontinue use in potentially hazard¬
ous situations.
► E ven if your headset is an open-air type designed to let you hear outside sounds,
don’t turn up the volume so high that you can’t hear what’s around you.

Technics SL-XP505 Specifications

Power

power supply	DC 4.5 V
power consumption (AC adaptor)	3 W
power consumption (battery)	0.8 W (DC 3 V)

Audio Specifications

frequency response	20-20000 Hz
dynamic range	more than 94 dB
output voltage	1.0 V (50 kO)

Weight and Dimensions

dimensions	128x29.7x148 mm
weight	345 g with batteries