Technics SU-7300 Operating Instructions

We want to thank you for selecting this product
and to welcome you to the growing family of
satisfied Technics product owners around the
world.
We feel certain you will get maximum enjoyment
from this new addition to your home.
Please read these operating instructions carefully,
and be sure to keep them handy for convenient
reference.
Be sure to set the voltage selector to agree with the
voltage used in the region where the unit is uesd.The
desired voltage can be easily selected by using an
ordinary screwdriver. Never forget to always have the
voltage selector set to the correct setting because, if the
setting is incorrect, this unit could be ruined by using it
an incorrect voltage.
APPLIANCES
CONNECTABLE TO THIS
UNIT
BEFORE USING THIS
UNIT
-2-

Technics SU-7300 Specifications

General

Damping Factor	30
Speaker Load Impedance	4Ω to 16Ω
Input Sensitivity	2.5mV (MM)
Signal to Noise Ratio	90dB (line)
Channel Separation	55dB (line)
Output	150mV (line)