Need help?Do you have a question about the Technics SU-R1000 and is the answer not in the manual?
Details on JENO Engine, GaN-FET Driver, ADCT, and LAPC technologies for superior sound.
Explains Accurate EQ Curve and Crosstalk Canceller functions for enhanced record playback.
Highlights the Advanced Speed Silent Power Supply for stable power and low noise.
Instructions for unit installation, including dimensions and preparation.
Details on the provided calibration record for cartridge optimization.
Covers basic safety rules for handling the unit, including water, heat, and ventilation.
Safety guidelines related to the AC power cord and plug connection.
Recommendations for safe placement and operation to prevent damage or hazards.
Precautions for handling and replacing batteries in the remote control.
Information regarding FCC regulations and interference for US installations.
Details on Canadian ICES-3(B)/NMB-3(B) compliance.
Advisories on avoiding extreme temperatures, battery disposal, and pressure changes.
Identifies and explains the functions of the unit's front panel buttons and knobs.
Diagram and description of all input and output terminals on the rear panel.
Description of the remote control layout and basic functions.
Instructions on how to change the remote control's operating mode.
Guidance on connecting speakers and the AC power supply cord.
How to connect and use coaxial and optical digital audio sources.
Adjusting sound delay and enabling MQA decoding for enhanced audio.
Connecting and operating the unit with a PC or other USB devices.
Instructions for connecting analog audio output devices like Blu-ray players.
Connecting a turntable, selecting cartridge type, and optimizing audio input.
Switching the PHONO equalizer curve and reducing low frequency noise.
Using the unit as a power amplifier with an AV receiver or control amplifier.
Connecting power amplifiers, subwoofers, or similar devices.
Connecting recording equipment to the unit's input and output terminals.
Adjusting language, tone control, speaker balance, volume attenuator, and display.
Enabling audio output for PRE OUT/REC OUT and configuring Auto Off function.
Checking model name, firmware version, and adjusting dimmer level.
Using the output correction function (LAPC) and activating Direct mode.
Instructions for downloading and installing firmware updates for the unit.
Connecting and operating Technics devices via system control.
Actions for heat buildup, firmware checks, and restoring factory defaults.
Troubleshooting for unit not working, humming sounds, or no sound output.
Resolving distorted sound, dim display, or peak power meter issues.
Troubleshooting PC recognition, system control, and remote control problems.
Addressing auto standby, unit care, disposal, and message handling.
Explanation of error codes (Fxx), measurement failures, and device connection issues.
Technical specifications including general, amplifier, terminals, and format support.
Details on supported PC file formats (PCM, DSD) and MQA decoder functionality.
Information on limited warranty coverage, exclusions, and service procedures for USA.
Details on limited warranty, exclusions, and service for products purchased in Canada.
To Next Page
General
