Part VIII Sound
148
QQTG0692
Sound
<PAGE 2>
REVERB:
Use the REVERB
∧
and
∨
buttons to adjust the
depth of the REVERB (0 to 127).
DIGITAL EFFECT:
Use the DIG. EFFECT ON/OFF buttons to set
the DIGITAL EFFECT to on or off.
CHORUS:
Use the CHORUS ON/OFF button to set the
CHORUS to on or off. Use the
∧
and
∨
buttons
to adjust the depth of the effect (0 to 127).
MULTI:
Use the MULTI ON/OFF button to set the MULTI
EFFECT to on or off. Use the
∧
and
∨
buttons to
adjust the depth of the effect (0 to 127).
<PAGE 3>
EQ LOW:
Use the EQ LOW FC, GAIN
∧
and
∨
buttons to
adjust the sound quality in the lower range.
EQ HIGH:
Use the EQ HIGH FC, GAIN
∧
and
∨
buttons to
adjust the sound quality in the upper range.
GLIDE PEDAL:
Use the GLIDE ON/OFF buttons to enable or dis-
able the glide effect, if it has been assigned to
the Foot Switch (sold separately).
• For Foot Switch settings, refer to page 172.
SUSTAIN PEDAL:
Use the SUST ON/OFF buttons to enable or dis-
able the sustain effect, if it has been assigned to
the Foot Switch (sold separately).
PART EXP PEDAL:
Use the EXP PDL ON/OFF buttons to enable or
disable part expression by the expression pedal
(sold separately).
• To enable the ON/OFF setting for each part, it
is necessary to set EXPRESS. PEDAL to
PART EXPRESSION on the FOOT CON-
TROLLERS display. (Refer to page 173.)
ORIGINAL TUNING:
Use the ORIG ON/OFF button to enable or dis-
able the tuning for each sound.
• For details about ORIGINAL TUNING, refer to
page 152.
13_Part VIII.fm 148 ページ ２００３年２月５日 水曜日 午後１時５１分
To Next Page
Loading...