Technics SX-P30

Getting started
Plug the AC adaptor (included) into an
outlet
• Connect the connecting plug of the
AC adaptor (supplied) to the DC IN
terminal of the instrument, and the
power-supply plug to a wall outlet
Connect audio equipment to the piano
• Since this instrument has no built-in
speakers, connect a stereo set
and/or speakers that have built-in
amplifiers
® For monaural sound, connect the
cord to the R/R+L terminal (Do not
connect the cord to the L terminal)
• You can also hear the sound with
headphones by connecting them to
the PHONES terminal
Press the PLAY button to turn it on
o Press the PLAY button of the piano
to turn It on, and then turn on the
power switch of the connected
audio apparatus (When turning off
the power supply of the piano, be
sure to turn off the power switch of
the connected audio apparatus first)
o The indicator lamp at the left on the
front of the piano lights up when
power IS on
Adjust the tuning mode
When the power is turned on, this instru¬
ment IS tuned like an acoustic piano, that
IS, the high keys produce slightly higher
pitched tones and the lower keys produce
slightly lower pitched tones (PIANO
TUNING) However, when the power supply
IS turned on while a black key is pressed,
the instrument is tuned evenly over the en¬
tire pitch range (EQUAL TEMPERAMENT)
o When the power supply is turned off, the
piano returns to the original PIANO
TUNING mode
Tuning
Unlike an acoustic piano, your Digital Piano
never needs tuning
o The pitch of this instrument can be
adjusted when playing along with other
instruments
4