Technika DAB-109CR User Manual

6
FM RECEPTION STATION PRESETS
DAB and FM presets
Your radio can store up to 10 of your favourite stations as
presets on both the DAB and FM bands for quick recall.
To store a preset
Tune to the station you want to store as a preset.•
Press and • hold the PRESETS button.
The legend ‘Preset’ will appear on the display followed by a
ashing digit to indicate the current preset number.
To store your station in this preset number, press the •
PRESETS button.
To choose a dierent preset location to store your station, •
turn the VOLUME/SELECT control to nd your preferred
preset number, then press the PRESET button to store
the station.
When you store a preset, the display will read ‘PRESET SAVED’ to
conrm the number you selected.
NOTE: You can choose a preset number that is already in use.
The new station details will over-write the stored station.
To recall a preset
Press the • PRESETS button.
Turn the• VOLUME/SELECT control to nd the preset
number you want.
As the knob is turned, the radio will tune to the station stored
in each preset number.
When you nd the preset station you want, stop •
browsing the preset list and the radio will continue to
play the selected station.
The display will read ‘PRESET LOADED’ to conrm the number
you selected.
SELECTING A DAB STATION
The stations are stored in an alphanumeric list.
To select another station
Press the • JOG MODE/SELECT button to switch to tuning
mode.
The legend <SELECT> appears on the display.
Turn the • VOLUME/SELECT control wheel to browse
through the list of station names on the display. Two
clicks of the wheel will change to the next/previous
station in the list.
When you nd the station name you want to listen to, •
press the JOG MODE/SELECT button.
AUTO ENTER
If preferred, you can select ‘Auto Enter’ mode for automatic
DAB station selection. When Auto Enter is enabled, the last
step in the sequence above is not necessary and the station
will be selected as soon as you stop browsing the list.
Your radio is supplied from the factory with Auto Enter mode
switched o.
To switch AUTO ENTER mode on and o
Press and • hold the JOG MODE/SELECT button.
The legend ‘Auto Enter ON’ or ‘Auto Enter OFF’ will be
displayed.
Your radio can also receive FM band radio stations.
To change to the FM band
Press the • DAB/FM button.
To auto-tune to FM stations
Press the • AUTOTUNE button briey to tune to the next
station in the band.
Press and • hold the AUTOTUNE button to tune to the
previous station in the band.
Tuning will stop automatically when the station is reached.
To manually tune to FM stations
Press the • JOG MODE/SELECT button to select manual
FM tuning mode.
The legend <TUNING> appears on the display.
Turn the • VOLUME/SELECT control to tune manually up
or down the band and search for a station.
STEREO/MONO RECEPTION
You can set your radio to switch automatically between stereo
and mono FM reception (AUTO mode) or to receive in mono
only (MONO mode). Setting to mono mode may improve
sound quality in areas where a weak aerial signal results in
a high level of background noise.
To switch between FM AUTO and MONO modes
Press and hold the JOG MODE/SELECT button.
The legend ‘Radio mode: Auto’ or ‘Radio mode: Mono’ will be
displayed to indicate which mode is set.

Technika DAB-109CR Specifications

General

Brand	Technika
Model	DAB-109CR
Category	Clock Radio
Language	English