Technika DAB-109CR User Manual

7
If both alarms are set, the Alarm 1 and Alarm 2 symbols will
ash alternately.
WHEN THE ALARM SOUNDS
The alarm will continue to sound for one hour before switching
o automatically.
To switch o the alarm before this time
Press the • ALARM 1 or ALARM 2 button to switch o the
alarm that is sounding.
To extend the alarm for a further 5 minute ‘snooze’.
Press the • SNOOZE button to switch o the alarm that is
sounding.
The alarm will switch o for a 5 minute period, and the ‘z’ symbol
will show on the display to indicate ‘snooze’ mode.
Your radio includes a dual alarm function. The two alarms,
ALARM 1 and ALARM 2 can be set with dierent wake-up
times, then you can set either or both alarms to wake you. You
can also choose to be woken by a beep sound, a DAB station
preset or an FM station preset. Before using the alarms, you
must store your preferred wake-up settings.
STORING PREFERRED WAKE-UP SETTINGS:
Press and • hold the ALARM 1 or ALARM 2 button to
choose the alarm you want to set.
The display will conrm which alarm (ALARM 1 or ALARM 2) you
selected. The alarm time will be shown with the minutes digits
ashing.
Turn the • VOLUME SELECT control to set the minutes
digits.
Press the • JOG MODE/SELECT button to conrm the
minute setting.
The hours digits will ash.
Turn the • VOLUME SELECT control to set the hours digits.
Press the • JOG MODE/SELECT button to conrm the hour
setting.
The display will now show the legend ‘BEEP’ .
Turn the • VOLUME/SELECT control to choose between
TONE 1 and TONE 2 for the alarm beep.
Press the • JOG MODE/SELECT button to conrm the wake-
up tone setting.
The display will now show the legend ‘DAB’ .
Turn the • VOLUME/SELECT control to choose a DAB preset
station to wake to.
Press the • JOG MODE/SELECT button to conrm the wake-
up DAB preset setting.
NOTE:- Refer to the previous page (STATION PRESETS) for
information on how to store preset stations. If you choose an
unassigned ‘free’ preset number in error, the alarm will default
to the BEEP wake-up setting.
ALARM FUNCTIONS
If either of the alarms have been set to wake you, the ALARM
1 or ALARM 2 symbol will be shown on the display as shown
below-
The display will now show the legend ‘FM’ .
Turn the • VOLUME/SELECT control to choose an FM preset
to wake to.
Press the • JOG MODE/SELECT button to conrm the wake-
up FM preset setting.
The display will now show the legend ‘VOLUME’ .
Turn the • VOLUME/SELECT control to choose your
preferred wake-up volume level.
Press the • JOG MODE/SELECT button to conrm the
wake-up volume setting.
NOTE:- Ensure that the wake-up volume settings are set at a
high enough level to wake you.
ACTIVATING THE ALARMS:
Once you have stored your preferred wake-up settings, you can
activate either or both of the alarms to wake you.
To activate your chosen alarm:
Press the • ALARM 1 or ALARM 2 button repeatedly to
cycle through the wake up options you can choose from
the list as shown below-
Alarm 1
Alarm 2
Snooze
symbol
Set the radio to Standby before going to sleep.•
NOTE:- The above examples show Beep 1, DAB preset 1 and FM
preset 1 as preferred wake-up settings.
NOTE:- The snooze function can be selected repeatedly until
the alarm switches o after one hour.

Technika DAB-109CR Specifications

General

Brand	Technika
Model	DAB-109CR
Category	Clock Radio
Language	English