Start/Exit Streaming Media Playing System
1. Press SOURCE on the remote control unit to select the streaming media function.
2.Insert USB equipment into corresponding USB interface 2s after starting the system.
3. After entering the system menu, press Left / Right on the
remote control unit to select the require USB equipment press “OK” button to confirm the
selection and enter the interface .
5. To exit the streaming media playing system and watch a TV program, you must press “BACK”
button to return to the streaming media main menu at first(to protect equipment), and then
press SOURCE to select TV to return to the TV mode.
Notes:
1.While playing non-pictures or non-music files, press “MENU” or “SOURCE”,the
TV screen will be black and display corresponding menu.
2.While playing a USB ,press “BACK”, the screen picture will return to USB
main interface, and only at this time you can switch corresponding signal sources
by pressing “SOURCE” again.
4. Press Left / Righr to change pages then press UP / DOWN
on the remote control unit to select the required file, press OK button to enter the
selected file.
Streaming Media Playing System
To Next Page
Loading...
Need help?
General
