10
PROGRAM PLAY
You can load a disc and store a programmed selection of up to
32 tracks (CD) or 64 tracks (MP3/WMA disc) to play from the
disc in your preferred sequence.
To set a program (CD):
Load a disc and wait for it to read.•
Press the • MEM/C-ADJ button.
The display will change to the Program Entry display -
REPEAT, RANDOM & INTRO
Repeat play:
Press the • REPEAT button repeatedly to step through the
available repeat modes.
For CD the repeat options are -
Repeat (repeat the current track).•
Repeat All (repeat the complete CD).•
Repeat o.•
For MP3/WMA discs the repeat options are -
Repeat (repeat the current track).•
Repeat All (repeat all tracks on the disc).•
Repeat Album (repeat the current album/folder).•
Repeat o.•
If a repeat mode is set, the mode selected will be shown on the
display.
Random play:
Random play will play the tracks on the disc in a random
order.
Press the • RANDOM button to turn Random play on or
o.
If Random Play is set, RANDOM will be shown on the display.
Intro play:
Press the • INTRO key to set Intro play.
The rst 10 seconds of each track will now play.
If you hear a track you like and want to return to normal •
play, press the INTRO button again.
Select the track number you want to program by pressing •
the } or { button.
The ashing track number digits will show the track number.
To save this track into the program sequence, press the •
MEM/C-ADJ button.
The ‘Position in program’ digits will update to show the position
in the program for the next track.
Repeat these two steps until you have stored all the •
tracks in the program sequence.
NOTE:- If no key is pressed within a 10 second period during the
program entry sequence, program entry will be cancelled.
To set a program (MP3/WMA disc):
For MP3/WMA discs, tracks are entered into the program
sequence by rst entering the album number for the track
required, then the track number.
Load a disc and wait for it to read.•
Press the • MEM/C-ADJ button.
CD
Track number to program Position in program
The display will change to the Program Entry display, the
album number will ash -
Select the album number containing the track you want •
to program by pressing the } or { button.
Press the • MEM/C-ADJ button.
The track number digits will now ash.
Select a track number by pressing the • } or { button.
To save this track into the program sequence, press the •
MEM/C-ADJ button.
The ‘Position in program’ digits will update to show the position
in the program for the next track.
Repeat these steps until you have stored all the tracks in •
the program sequence.
NOTE:- If no key is pressed within a 10 second period during the
program entry sequence, program entry will be cancelled.
Playing a program (all discs):
Press the • //, button immediately after entering the
program to start the program playing.
The program will begin to play and MEMORY will show on the
display to show that a program is being played. Pause, track
selection and fast search functions will work as normal within
the programmed selection of tracks.
Clearing a program:
Press the • STOP button twice or open the loading door.
MP3
Track number to program Album to program
Position in program
To Next Page
Loading...
Need help?
General
