What to do if Technika T835 remote control is not working?
If your Technika DVR remote control isn't working, first, ensure the DVR was properly put into standby before being unplugged. Then, make sure nothing is blocking the front panel of the DVR. Finally, try replacing the batteries in the remote.
How to fix Technika T835 DVR when LED indicator does not glow?
If the LED indicator on your Technika DVR isn't glowing, the main power cable might not be properly connected. Check to ensure the cable is securely plugged into the power socket.
Using the 7-day EPG for program information and setting recording timers.
Essential safety guidelines for power supply, adapter, and cords.
Broad safety advice for using the apparatus, including environmental conditions.
Steps to connect to mains power and initial device startup.
Initial setup steps including hard disk initialization and channel scan.
Setting parental locks and creating a favorite channel list.
Accessing and using the EPG to view program information and set timers.
Setting and deleting recording timers, selecting channels for programs.
Recording entire series and resolving overlapping timer conflicts.
Displaying, deleting, and editing set recording timers.
Procedure for manually adding new timers and timer options.
How to access the list of recorded programs and their details.
Options for playing back recorded content and archiving to external devices.
Configuring timeshift duration and options for automatic discarding of recordings.
Steps to format the internal hard disk drive to restore normal operation.
Setting up parental control locks and changing the device PIN.
Performing automatic/manual channel scans and first-time installation.
How to pause and resume live television broadcasts using Time Shifting.
Troubleshooting a non-glowing LED and resolving no picture/sound issues.
Resolving remote control malfunctions and forgotten password issues.
Troubleshooting steps when recording does not start.
To Next Page
General