English - 21 -
General troubleshooting
PROBLEM POSSIBLE PROBLEM
WHAT TO DO
The Led indicator does not glow Main cable is not connected
Check If the main cable is not
plugged into the power socket
No picture or sound
No signal or weak signal
Check the Aerial and scart
connections
The remote control is not working
The digital set-top box
was unplugged without
fi rst going to stand by.
Remote control is incorrectly aimed.
Battery exhausted.
Press the standby key.
Check if anything is
obstructing the front panel.
Change the batteries
Password forgotten
Make contact with the nearest
service center.
Record does not start
No or weak Aerial input Signal
Check Aerial input connection.
To Next Page
Loading...
General