Technika TV BOX 8320HD - 8 day Programme Guide; TV Channel Universe; Recording TV

11
5.2.2. 8 day Programme Guide
Pressing GUIDE on your remote control will bring
up the 8 day Electronic Programme Guide (EPG)
which will show you what’s on TV over the next 8
days.
Using the arrow buttons on your remote control
you can move around the EPG and select individual
channels or programmes.
5.2.3. TV Channel Universe
Every channel has its own “Channel Universe”, which
you can access by pressing the PiP button on your
remote control, while you are watching the channel.
The programme will move into the top right hand side
of the screen and you will be able to:
o View the recordings which you’ve made from
that channel.
o Find out about the programmes coming up on
that channel.
o Read the synopsis for the current programme.
o See what’s on next on that channel.
5.2.4. Recording TV
Only free to air digital TV programmes can be recorded to the hard drive of your Sure TV Box.
To record something now: You can start to record a TV programme that you’re watching by pressing the
RECORD (REC) button on your remote control. You can then either press OK to record the remainder of the
programme, or change what time the recording should stop.
To record something later: To set up a recording for a TV programme which is due to air later, you can use one
of the following methods:
o Press the GUIDE button on your remote control and scroll through to find the correct channel using
the LEFT/RIGHT arrow buttons. Browse through TV listings over the next 8 days using the UP/DOWN
arrow buttons and press RECORD when you’ve found the programme which you wish to record.
You can press RECORD again to bring up the Recording Options which include the ability to set repeat
recordings, to modify the start and end times of a recording and to cancel the recording.
o On the vertical channel list, find the correct channel and browse through the scheduled programmes
using the RIGHT arrow button on your remote control, until you find the programme which you wish
to record. Press the RECORD button and set the recording ahead of time.