7
iPod ADAPTORS iPod COMPATIBILITY
Your Media Player is compatible with iPod nano, Mini, Video,
Classic, Photo and Touch models only.
Before docking your iPod you must rst select the correct
adaptor, then t it into the iPod docking bay. There are 8
adaptors supplied, each has an adaptor number printed on
the underside.
LIST OF COMPATIBLE iPod MODELS
iPod touch (8GB, 16GB or 32GB)
Use adaptor No.8.
iPod nano (3rd generation video 4GB or 8GB)
Use adaptor No.7.
iPod nano (1st/2nd generation)
Use adaptor No.1.
iPod Video (30GB)
Use adaptor No.3.
iPod Video (60GB or 80GB)
Use adaptor No.5.
iPod Classic (80GB)
Use adaptor No.3.
iPod Classic (160GB)
Use adaptor No.5.
iPod Photo (40GB or 60GB)
Use adaptor No.6.
iPod Photo (20GB or 30GB)
Use adaptor No.4.
iPod mini (4GB or 6GB)
Use adaptor No.2.
NOTE:- iPod models not listed above (including iPod
Shue) are not compatible, or not equipped with a docking
connector.
If you own an iPod Shue or a model that is not in the
compatibility list, you can still connect the sound output to
the LINE-IN socket on the rear panel.
FINDING THE CORRECT iPod ADAPTOR
Refer to the table of compatible iPod models in the next
column and the correct adaptors to match them. Once you
have located the correct adaptor for your iPod, press it gently
into the iPod bay before attempting to connect your iPod.
CONNECTING OTHER iPod
MODELS (INC SHUFFLE)
Using a 3.5mm stereo jack to jack cable (not supplied), •
connect one end of the cable to the headphone socket of
the iPod, and the other end to the LINE-IN socket on the
back panel.
To listen to your iPod, follow the instructions on page 13 •
for playing equipment connected to LINE-IN.
NOTE:- The volume control of the iPod must be turned up
when playing through LINE-IN.
NOTE:- An iPod connected to LINE-IN cannot be operated
from the remote control.
Headphone socket
To LINE-IN
Adaptor number
NOTE: If you connect an iPod without tting the correct
adaptor, you may damage the iPod and your player.
To Next Page
Loading...