TechniSat DIGIT ISIO S3 - Page 75

75
DE
EN
You can also highlight the individual menu items in the same way as you
highlight an item on a submenu, to open them and alter the respective
seings.
The menu items in some menus have to be highlighted by moving sideways.
This is done by pressing the right/le arrow buons.
By pressing the up/down arrow buons it is possible to move the highlight
from line to line, and to move upwards and downwards page by page using
the page up/down buons.
You will see the so-called menu path in the uppermost line of the menu. This
shows you the menu you are currently in and the path you took to reach this
menu. In the example shown, this is Main menu > Seings > Picture seings.
The menu path is also shown throughout the user manual and shows you how
you can reach the respective menu with the seings described.
If the blue function buon with Help is displayed on the boom line on the
screen, a Help page can be displayed by pressing this buon, and hidden by
pressing it again.
In the main menu, you can press the yellow function key to view the Smart
TV device functions and to accept (on) or reject (o) the data protection
seings.
9.3 Accepting seings/Exiting menus
In some menus and functions the changes made must be accepted manually in
order to save them permanently.
If you do not do so, on exiting the menu or function the values that were valid before
the change will be automatically set again.
If an Accept field or the green function buon with Accept is displayed in the
boom line of the screen, you can see that the changes made must be saved
manually to be accepted.