TechniSat DIGIT ISIO S3 - Page 79

79
DE
EN
/ Red function buon: Pressing/holding down deletes the character in
front of the blue highlight/the entire entry.
/ Green function buon: The entered term is accepted.
/ Blue function buon: The keyboard switches to the alternative
characters.
/ Arrows: Moving the blue highlight within the term.
The SMS keyboard is operated using the numeric keypad on both the alphabetical
and the QWERTY keyboard and can be used at any time.
The coloured buons thus retain the functions described above.
> Press one of the 0 - 9 number keys to select the various leers, numbers,
characters and symbols. Aer first pressing a numeric keypad key, the first
leer of the corresponding row is highlighted.
> Every time the same numeric pad key is pressed, the highlight moves one
field to the right. Press until you reach the character you want. This will be
added to the entered term aer a short delay.
The various numeric pad keys are assigned the following displayed
leers, numbers, characters and symbols.
0:
1:
2:
3:
4:
5:
6:
7:
8:
9:
Once you have reached the field you want with the highlight, you can
then begin selecting the next character immediately since, in this case,
the character is added directly to the term. If you wish to continue directly
selecting a character from the same numeric pad, you can add the previously
highlighted character to the term by pressing the right arrow key.