TechniSat DIGIT ISIO S3 - Page 78

78
9.4.3 Entering numbers
> Use the number buons to enter the new seing you want if a question mark
or a numeric value is displayed.
9.4.4 Virtual keyboard
If
is shown on the right next to the set value, then the change in the value is
altered using the virtual keyboard. You have three dierent input options
when using this data entry method.
You can switch the keyboard layout between the QWERTY keyboard and the
alphabetic keyboard; an SMS keyboard can also be used at any of reception
parameters.
The functionality of the QWERTY keyboard is identical to that of the alphabetic
keyboard. They only dier in the arrangement of the various leers, numbers,
characters and symbols.
> Press the OK buon to open the virtual keyboard. The keyboard now appears
in alphabetic form.
> You can switch to the QWERTY keyboard and back to the alphabetic keyboard
by pressing theOption(OPT) buon.
You can now enter the desired term as follows:
Arrow buons:
Moves the highlight over the keys of the virtual
keyboard.
OK:
The highlighted character is added to the end of
the term, or the highlighted function is executed.
/ Yellow function buon: The keyboard switches between upper case/lower
case.