TechniSat DIGIT ISIO S3 - Page 84

84
Picture format
> Use the right/le arrow buons to set the picture format for the connected
TV.
The picture format on the TV will be automatically adjusted according to your
selection.
> Press the OK buon to confirm the selection.
Selecting reception signals
Under this point in the installation wizard, select which types of reception you want
to use.
> Use the up/down arrow keys to select the reception signal you want to
switch on or o.
Satellite antenna (DVB-S/S2) for digital satellite channels.
Cable (DVB-C) for digital cable IP channels (Cable-to-IP).
Network (IPTV) for digital distribution stations.
> Press the OK buon to open the selection window; highlight the seing you
want with the up/down arrow keys and close the window by pressing the OK
buon again.