TechniSat DIGIT ISIO S3 - Page 85

85
DE
EN
> To get to the next step of the installation, use the arrow keys to highlight the
Accept field and confirm with the OK buon.
The following steps depend on the choice of reception option.
Network configuration
In this step the TV automatically checks the network configuration.
> If you do not want to run the network configuration check, press the INFO
buon to skip this step.
> If you wish to check or change the network seings, press the Option buon:
> Use the up/down arrow keys to select whether you want to configure a LAN
or WLAN network (only with an external WLAN stick) and press the OK buon.
> Now carry out the network seings. Consult the instruction manual for more
detailed information on the seing options.
> Then press the INFO buon to accept the seings. The network configuration
check restarts.
> Press OK to go to the next step.