TechniSat DIGITRADIO 10 C - Page 119

119
DE
EN
FR
NL
> Press the MENU buon and use the  /  buons to select the [Scan
Seings] > [Set Manually] item, then press the OK buon.
> Use the  /  and OK buons to select a channel (5A to 13F). The signal
intensity will now be shown on the display. If a DAB+ station is being received
on a channel, the station ensemble name is displayed. The antenna can now
be aligned to the maximum signal intensity.
Stations with a signal strength below the required minimum signal intensity
are not transmiing a strong enough signal. Align the dipole antenna, if
required, as described in Section 5.3.1.
If there are stations on the set frequency or channel that have not yet been
stored in the station list, they will now also be saved.
7.2.8 Volume adjustment (DRC)
The DRC menu item is used to set the compression rate, which compensates for
dynamic fluctuations and the associated volume variations.
> Press the MENU buon and use the  /  buons to select [Sound Seings]
> [DRC].