What to do if my TechniSat Radio has bad Bluetooth connection and dropouts?
If you are experiencing a bad Bluetooth connection and dropouts with your TechniSat Radio, ensure that you do not exceed the maximum Bluetooth range of 10 meters.
What to do if my TechniSat Radio cannot be switched on?
If your TechniSat Radio cannot be switched on, it might not be receiving power. Ensure the power supply unit is correctly connected to both the socket and the device.
What to do if my TechniSat Radio has poor reception via DAB+/FM?
If you are experiencing poor reception via DAB+/FM on your TechniSat Radio: * Fully extend the antenna. * Try changing the position of the antenna or the radio itself.
What to do if my TechniSat Radio has no sound?
If you cannot hear any sound from your TechniSat Radio, increase the volume.
What to do if my TechniSat Radio display does not switch on?
If the display on your TechniSat Radio does not switch on, disconnect the device from the power supply and then reconnect it.
What to do if my TechniSat Radio cannot be operated?
If your TechniSat Radio cannot be operated, disconnect the device from the power supply and then reconnect it.
General| Radio type | Internet |
|---|---|
| Tuner type | Digital |
| FM band range | 87.5 - 108 MHz |
| DAB band range | 174 - 240 MHz |
| Supported radio bands | DAB+, FM |
| Preset stations quantity | 60 |
| Equalizer | Yes |
| RMS rated power | - W |
| Built-in speaker(s) | No |
| Display type | TFT |
| Display diagonal | 2.8 \ |
| Display resolution | 240 x 320 pixels |
| Wi-Fi standards | 802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Bluetooth version | 4.1 |
| Coloration | Monochromatic |
| Thermometer | - |
| Antenna type | External |
| Product color | Black, Silver |
| Internet radio services supported | Spotify |
| On Screen Display (OSD) languages | DAN, DEU, DUT, ENG, FIN, FRE, ITA, NOR, POL, POR, SWE |
| Power source | AC/DC |
| AC input voltage | 230 V |
| DC input voltage | 5 V |
| AC input frequency | 50 Hz |
| Power consumption (standby) | 0.72 W |
| Power consumption (typical) | 1.4 W |
| Clock mode | 24h |
| Operating temperature (T-T) | 5 - 35 °C |
| Operating relative humidity (H-H) | 5 - 90 % |
Weight and Dimensions| Width | - mm |
|---|
Visual guide showing the front panel components and labels.
Explanation of warning icons and their significance within the manual.
Defines the device's purpose and usage guidelines.
Specifies the intended users for this instruction manual.
Provides critical information to ensure safe and proper use of the device.
Information on the device's compliance with EU standards.
Statements regarding product liability and reproduction rights.
Details warranty, support contact, and repair procedures.
Lists all components included in the product package.
Highlights key functionalities and capabilities of the DIGITRADIO 10 IR.
Essential steps for getting the device ready for its first use.
Instructions for connecting and positioning the antenna for optimal reception.
Guidance on connecting the device to external audio systems.
Steps for safely connecting the power adapter to the device and mains.
Procedure for inserting batteries into the remote control.
Basic operational procedures for the device.
Instructions on how to power on the DIGITRADIO 10 IR.
Instructions on how to put the device into standby mode.
How to choose between DAB+, FM, Bluetooth, and Internet Radio modes.
Methods for controlling the audio volume and muting the sound.
Details the types of information displayed on the screen.
How to access and cycle through various displayable data.
Information regarding album art and additional data displays.
Explanation of DAB+ technology and its components.
Instructions for receiving and tuning DAB+ radio stations.
Steps to conduct a full scan for all available DAB+ stations.
How to choose and switch between available DAB+ stations.
Guide to saving favorite DAB+ stations into memory slots.
Accessing and playing back saved DAB+ stations from memory.
Instructions for overwriting or deleting stored station memory.
How to view and interpret the signal strength indicator for DAB+.
Procedure for manually tuning and aligning for DAB+ stations.
Configuration of dynamic range compression settings for volume.
How to remove stations that are no longer receivable.
Steps to activate and use the FM radio function.
Receiving and displaying RDS data for FM broadcasts.
Procedure for automatically scanning for FM radio stations.
How to manually tune FM stations by frequency.
Options for configuring the sensitivity of FM station scans.
Adjusting audio output for stereo or mono sound based on reception.
Guide to storing favorite FM stations into memory slots.
Accessing and playing back saved FM stations from memory.
Instructions for overwriting or deleting stored FM station memory.
Browsing and selecting internet radio stations by category.
Viewing a history of recently played internet radio stations.
How to save favorite internet radio stations to memory.
Accessing and playing saved favorite internet radio stations.
Steps to activate and prepare the device for Bluetooth pairing.
Instructions for pairing smartphones or tablets via Bluetooth.
How to disconnect or unpair a Bluetooth-enabled device.
Setting the device to automatically turn off after a specified period.
Instructions for setting and managing alarm times and sources.
How to turn off the alarm or use the snooze feature.
Adjusting sound preferences like treble and bass levels.
Configuration options for network connectivity and internet access.
Steps for establishing a Wi-Fi connection using a wizard or manual setup.
Using the WPS function for simple wireless network connection.
Manually setting up network parameters like SSID, IP address, and security.
Adjusting display brightness, color schemes, and information.
Managing the PIN for the CONNECT App control.
Removing saved wireless network configurations.
Configuring whether WLAN remains active in standby mode.
Adjusting the device's time and date settings.
Manually inputting the current date and time on the device.
Setting up automatic time synchronization from Internet, DAB, or FM.
Choosing between 12-hour and 24-hour time display formats.
Adjusting screen brightness and selecting visual themes.
Customizing display information, picture size, and brightness levels.
Choosing the user interface language for the device.
Restoring the device to its default factory configuration.
Viewing details such as the current software version.
Information regarding device software updates.
How to rerun the initial setup wizard for configuration.
Information pertaining to the device's data protection measures.
To Next Page